Frame page link

Fork page link

Fender page link

Engine page link

Gallery page link

DIY page

 

 

 

 

Photo 1

The drum brake assembly has been removed. The stub axle and bearing assemblies are now ready to be dismantled, checked and cleaned or replaced if necessary.

 Photo 2

The stub axle has been stripped, cleaned and new seals fitted and new bearings installed and greased. The assembly is now ready for fitting the brake mounting plate.

 Photo 3

One of the completed mounting plates is fitted and ready for twin callipers. (Refer DIY Guide)

Photo 4

Test fitting the modified VW brake drum and spacers. (Refer DIY Guide)

Photo 5

The complete brake assembly with brake discs and callipers. Beautiful! The wheel studs haven't been set in this pic. (Refer DIY Guide)

 Photo 6

The completed brake assembly. All the brake callipers have been refurbished, new pads fitted and new brake hoses made to order. (Refer DIY Guide)

Photo 7

The hanging pedal assembly. (Refer DIY Guide)

Photo 8

Master brake cylinder mounted in place to fit neatly between the FatBob tank sections.

 Photo 7

Hand brake lever has been fitted.